Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Granger, TX
Gate installation in Granger, TX starts with the ground under the gate, not the gate itself. This is blackland clay country, and the gates that go in here have to survive a soil that swells after rain and shrinks hard in a dry summer. Most of what we install around Granger is built for working property and long rural driveways: pipe-rail entrances, wide swing gates on acreage, and electric driveway gates on the newer places at the edge of town. We’re a dedicated gate specialist, so nobody here is squeezing a gate job between garage door calls.
Call (888) 853-0490. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Granger Homes Are Different
Granger sits on some of the most active clay soil in Central Texas. The blackland ground here takes on water, swells, and pushes against anything buried in it. Gate posts get heaved out of plumb, hinges pull loose, and a gate that swung clean in March drags on the ground by September. That single fact drives most of the work we see around ZIP 76530.
The housing stock matches the land. Granger is mostly older single-family homes and rural acreage, with metal pipe-rail and chain-link gates on large lots and farm entrances. The newer rural subdivisions on the outskirts add some wood and vinyl driveway gates, but they’re the exception rather than the rule.
Then there’s the weather. Summer sun bakes the finish off wood and turns vinyl brittle. Periodic drought pulls a post one way, heavy rain pushes it back the other. Occasional freezes crack welds and stiffen operators that were already tired. A gate on a Granger property is a moving part sitting in a soil that never stops moving, and it needs hardware and footings chosen for that. On a town lot or a hundred-acre place, the questions are the same: is the post straight, is the hinge sound, and will it still close after the next rain.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Granger Services
Two jobs come up over and over on Granger properties: a gate that’s stopped working and an entrance that needs to be built right from the start.
Gate Repair in Granger
Granger gate repair is mostly heavy-duty work. Sagging pipe-rail gates, hinges worn through after years of use, and cattle-pen entrances that were welded up on the property and now drag or won’t latch. On the rural places we spend a lot of time correcting DIY installs, re-setting posts, and replacing hardware that was never sized for a gate that size. Blackland clay is usually the root cause: a post that’s been pushed out of line takes the whole gate with it. We work on your brand and don’t care what’s already hanging there. You’ll find the full scope of that work on our Gate Repair in Granger page.
Electric Gate Repair in Granger
Electric gate repair is its own trade. Motors, control boards, safety sensors and access wiring fail in ways that a general handyman can’t diagnose, and a farm gate running a Ghost Controls or Viking operator needs someone who knows the electronics as well as the iron. Summer heat and a stiffening winter freeze both age an operator faster here than in town. Commercial entrances running DoorKing equipment are a regular part of our work too. We diagnose the fault first and don’t replace parts that are still good. That’s covered in more detail on our Electric Gate Repair in Granger page.
Gate Installation in Granger
New gate installation in Granger is a different job than it is in a Round Rock subdivision. The land decides the build. Long driveways on acreage need wide spans and posts driven to proper footing depth, because a shallow post in blackland clay will lift within a season or two. The older and rural properties here also tend to have gates that were never set right, which is often why we’re called to install a replacement rather than patch what’s there. That’s how we approach the work in Gate Installation.
Automatic Gate Installation
Signs you need it
You’re driving out to open a gate every time you leave, or your old operator has been repaired twice and still fights the gate.
What it costs in Granger
A typical automatic gate installation runs about $2,800 to $6,500 depending on span, operator and whether the power run is already in place, with the written estimate setting the final price.
How we do it
We set and brace the posts to proper footing depth, hang the gate and check the swing, then mount the operator, wire the controls and safety edges, and run the gate through a full open-and-close cycle before we call it done.
Driveway Gate Installation
Signs you need it
The entrance is open to the road, the old gate has rusted or rotted past repair, or the ground has moved enough that it no longer lines up.
What it costs in Granger
Most driveway gate installations here land around $1,800 to $5,200, depending on width, material and whether it’s electric or manual.
How we do it
We walk the driveway grade, set posts for the long-term soil conditions on your property, hang the gate and hardware, then adjust the latch and stops so it closes clean and stays closed.
What Gate Installation Costs in Granger
| Item | Typical range in Granger |
|---|---|
| Driveway gate installation | $1,800 – $5,200 |
| Automatic gate installation | $2,800 – $6,500 |
| Power run and safety edges | $450 – $1,400 |
How long does a new gate installation take in Granger?
Most residential installations take one to two days on site once the gate and operator are in. Rural projects with a longer power run or site prep can take longer. We measure first, then give you a written price and a scheduled date before any work starts.
Do you handle the power run and the safety edges?
Yes. We handle the low-voltage wiring for the operator, the safety sensors and access hardware as part of the installation. Any high-voltage line to the site should be done by a licensed electrician, and we’ll tell you when that’s needed so nothing gets missed.
Brands We Service in Granger
We work on your brand, not one manufacturer’s. That spans residential systems like Ghost Controls and Mighty Mule, mid-range operators from Viking and LiftMaster, and commercial-grade equipment from DoorKing, FAAC, BFT and Elite. We don’t claim to stock parts for every one of them, so turnaround depends on what the gate needs. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Granger, TX
| Service | Typical range in Granger |
|---|---|
| Gate repair | $150 – $850 |
| Gate spring-free hinge and hardware replacement | $180 – $600 |
| Electric gate repair | $250 – $1,200 |
| Operator and control board repair | $300 – $1,100 |
| Safety sensor and access control repair | $200 – $750 |
| Driveway gate installation | $1,800 – $5,200 |
| Automatic gate installation | $2,800 – $6,500 |
| Power run and safety edges | $450 – $1,400 |
Post repair and re-setting costs more in Granger when the blackland clay has moved the post badly and the footing has to be dug out and rebuilt. Long spans on acreage and heavy gates also push price up. Every job is quoted and agreed before any work starts, and the written estimate sets the final price.
Neighborhoods We Serve in Granger
We cover Granger and the rural property around it, from the older streets in town out to the acreage and farm entrances on the outskirts. Expect us to book you into the next opening, Sunday through Friday, 7am to 7pm. Some of the areas we work:
- Downtown Granger and the older in-town blocks
- Rural acreage and farm entrances off the county roads
- The newer rural subdivisions on the edge of town
- Properties along the Granger lake area
- Outlying lots on long driveways around ZIP 76530
Service Area – Cities Near Granger
Granger sits east of the main population centers, and we work the towns around it too. If you’re on the Taylor side, our Taylor, TX page covers the same gate work. Closer to the city, we handle Round Rock, TX, where ornamental subdivision gates are far more common. To the south we cover Hutto, TX and Pflugerville, TX. Rural property anywhere in this stretch is in range.
Serving Granger, TX – Our Local Coverage Area
We serve Granger and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Granger
We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. Granger is out past the city, so response depends on the day and where the property sits. Call (888) 853-0490 and we’ll give you the next opening when you call.
Most gate installations need a permit, and the rules depend on the city and county. Call your city’s building department before work starts to confirm what’s required for your property. We’ll tell you what we know about the installation side.
Repairs usually run $150 to $850, electric gate repair $250 to $1,200, and new installation $1,800 to $6,500 depending on size and operator. Estimates are free, and the price is quoted and agreed before any work starts.
Our technicians have up to 11 years of experience.
For a gate that drags, won’t latch, or needs a new entrance built right for the ground, call Gate Repair Round Rock at (888) 853-0490 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll quote the job in writing before we touch a hinge. Granger properties get the same service whether it’s a cattle gate on acreage or a driveway gate in town.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Granger Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Scott Sullivan"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Rashad Nash"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Ryan Vaughn