Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Round Rock?
Gate repair in Round Rock typically runs $150 to $650 for most residential repairs, with common fixes like hinge and latch work or safety sensor replacement landing at the low end and motor or control board replacement pushing toward the top. Larger commercial access systems and electric gate repairs involving access-control wiring often land between $400 and $1,200. These are typical estimate ranges for this market, not exact quotes; the written estimate sets your final price, and it’s free.
We’re a dedicated gate specialist. Electric or manual, we handle both, on residential driveway gates and commercial access systems. Our technicians have up to 11 years of experience, and we work on your brand whether that’s LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule.
Key takeaways:
- Most residential gate repairs fall between $150 and $650.
- Electric gate repair (motors, control boards, sensors, wiring) usually runs $400 to $1,200.
- New gate installation is a bigger project and priced separately per job.
- Estimates are free and set per job in writing.
- Call (888) 853-0490. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Repair Cost Breakdown (2026)
Here’s how individual repairs shake out in the Round Rock market. These are typical estimated ranges; the written estimate you get after we look at your gate sets the final price.
| Repair Type | Typical Estimated Range |
|---|---|
| Hinge, roller, or track repair | $150 – $350 |
| Latch and lock repair or replacement | $125 – $300 |
| Gate alignment and sagging repair | $200 – $450 |
| Safety sensor or photo-eye replacement | $175 – $375 |
| Control board replacement | $300 – $650 |
| Gate operator (motor) replacement | $650 – $1,200 |
| Access-control wiring and keypad work | $250 – $600 |
| Manual gate repair (no operator) | $150 – $400 |
| Commercial heavy-duty gate repair | $500 – $2,000+ |
| New gate installation (priced separately) | Quoted per project |
What drives the cost up or down? The biggest factor is what’s actually broken. A hinge or latch is cheap to fix. A dead control board or motor is not. The second factor is the operator itself: entry-level residential systems like Mighty Mule and Ghost Controls use parts that are simpler and less expensive to work with, while professional-grade operators like FAAC, BFT, and DoorKing use heavier components that cost more to source. Commercial gates sit at the top because the hardware is built for constant traffic and higher weight. Electric or manual matters too, since electric gate repair involves tracing wiring and testing control logic, which is more labor than mechanical work. None of these are guesses about your specific gate; once we’re on site, the written estimate tells you exactly what it’s going to be.
What Affects Gate Repair Pricing in Round Rock
Pricing here isn’t random. Several things move the number up or down, and knowing them helps you understand your estimate when it arrives.
- Type of gate and operator. A manual driveway gate with a sticky latch is a small, quick fix. An automatic slide gate with a failed control board on a commercial system means heavier parts and more diagnosis. The system you have sets the floor of the repair.
- Brand and parts availability. Residential operators like Linear and Viking commonly run on parts that are easy to identify and replace. Commercial operators like DoorKing and Elite sometimes need parts ordered in, which can affect the total. We work across all nine brands, so we’re not locked into a single manufacturer’s pricing.
- Mechanical vs. electric diagnosis. Mechanical work (hinges, sagging, alignment) is straightforward labor. Electric gate repair is a different job: motors, control boards, safety sensors, and access-control wiring each add diagnostic time, which is why those repairs run higher.
- Gate weight and size. A heavy ornamental iron or commercial gate puts more stress on hinges, operators, and tracks than a lighter residential gate. Heavier gates tend to fail those parts sooner and cost more to correct.
- Round Rock’s clay soil and summer heat. The blackland clay around Round Rock shifts as it takes on and loses moisture, and that movement shows up in gate posts and footings: a gate that swings cleanly one month can start dragging after the ground moves. Summer heat is hard on exposed operators and their electrical components, which can shorten the lifespan of control boards and motors. Both are reasons residential gate failures here often come back to alignment and operator wear.
- Whether it’s a repair or an installation. Sometimes a gate is past the point where patching makes sense. When that happens, we handle new gate installation as well, so you’re not handed off to a different contractor to finish the job.
How to Save on Gate Repair
You can’t choose what breaks, but you can keep a repair from turning into a bigger one. A few practical moves keep the number down in Round Rock.
- Fix the small stuff before it compounds. A dragging gate that’s rubbing on the ground wears hinges and track faster. Catching a sagging gate or a worn roller at the start keeps it a mechanical fix instead of a motor replacement.
- Address sensor faults quickly. A gate that reverses or stops short is usually a safety sensor problem, and that’s a modest repair. Left alone, the repeated cycling stresses the operator itself.
- Know what you have. Knowing your operator brand (LiftMaster, Linear, FAAC, BFT, and the rest) helps us bring the right diagnosis to the first visit. If you have a manual for the system, keep it handy.
- Get an honest repair-or-replace call. Sometimes the smarter spend is a repair; sometimes it’s a new gate. We’ll tell you straight which one your gate actually needs rather than defaulting to a replacement.
- Start with a free estimate. No fee, no obligation, no surprise. Call (888) 853-0490 and we’ll set up a time to look at the gate and put the price in writing.
We don’t inflate a quote to push a replacement, and we don’t pad a repair to avoid a hard conversation. The gate gets diagnosed, the options get laid out, and you decide. That’s the whole approach.
Why a Gate Specialist Handles This Better
Gate work is its own trade. A company that also does garage doors, fencing, and general handyman work is splitting its attention across unrelated systems, and gates have their own vocabulary: operators, control boards, safety sensors, access-control wiring, footings, swing and slide mechanics. We stay on gates only, which means every technician who shows up already lives in this specialty rather than dividing attention across trades.
That focus shows up in the diagnosis. When your gate reverses at the halfway point or the operator clicks but doesn’t move, the answer is almost never “replace the whole thing.” It’s usually a sensor, a control board, a limit setting, or a wiring fault, and a technician who works on gates every day gets to that answer faster. We also work across nine brands, from DIY-friendly residential operators like Mighty Mule and Ghost Controls to professional-grade systems like FAAC, BFT, and DoorKing. A single-brand dealer has an incentive to sell you that brand. We don’t, because we work on your brand, not ours.
For customers who want the full scope of what we handle, the main Gate Repair Round Rock page lays out repair, electric systems, and installation. If you already know you need mechanical work specifically, our gate repair page goes deeper on the repairs themselves. And if the gate is beyond saving, we handle new gate installation under the same roof, so you’re not handed off to a second contractor midway through.
When a Repair Is the Wrong Call
Nobody likes hearing that a repair won’t hold, so we’d rather you know when that’s coming. A repair usually makes sense when the gate structure and posts are sound and the failure is a single component: a hinge, a sensor, a control board, a motor that’s simply worn out. Fix the part, and you’re back up and running.
A replacement starts to make more sense when the gate itself is failing structurally: posts that have shifted and won’t hold alignment, frames that have rusted through, or an operator that’s so far past its service life that every repair leads to another one. Heavier commercial gates with multiple failures in a short window are the same story. In those cases we’ll walk you through what a new installation involves and price it separately, because that’s a different job than a repair.
Either way, we tell you what we see. You’re not getting a replacement quote for a sensor problem.
What Happens When You Call
You call, you tell us what the gate is doing, and we get you on the schedule. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday. When a technician arrives, they diagnose the gate, explain what’s wrong in plain language, and put the repair options in front of you with a written estimate. The estimate is free, and the price is set per job from that written number, not from a menu.
We handle residential driveway gates and commercial access systems. Electric or manual, we handle both. Fast dispatch, 7am-7pm.
FAQs – Gate Repair Cost
How much does gate repair cost in Round Rock?
Most residential gate repairs in Round Rock cost between $150 and $650, depending on whether it’s a mechanical fix or an electric gate repair. Motor and control board work usually falls toward the top of that range or above it, and commercial systems can run higher. The written estimate sets your final price, and it’s free. Call (888) 853-0490 for an exact quote.
Is it cheaper to repair or replace a gate?
Repair is almost always the cheaper option when the gate and posts are structurally sound and one component has failed, and most repairs land between $150 and $650. Replacement becomes the better value when posts won’t hold alignment, the frame has rusted through, or an old operator keeps failing. Call (888) 853-0490 for a free estimate that tells you which situation you’re actually in.
How much does electric gate repair cost in Round Rock?
Electric gate repair in Round Rock typically runs $300 to $1,200, with control board replacements around $300 to $650 and full operator replacement at $650 to $1,200. Wiring and keypad work sits in the $250 to $600 range. These are estimates; the written quote after diagnosis is final. Call (888) 853-0490 to schedule a free estimate.
Can you come today?
Same-day service is often possible, and dispatch runs 7am to 7pm, Sunday through Friday, so call early and there’s a good chance we can get out the same day. We answer 24/7. Call (888) 853-0490 and we’ll get you on the schedule.
Do you charge for estimates?
No, estimates are free, and there’s no service-call or diagnostic fee. We look at the gate, diagnose the problem, and put the price in writing; you decide from there. Call (888) 853-0490 for a free estimate.
Pricing reflects the Round Rock market as of 2026. Gate Repair Round Rock offers free estimates – call (888) 853-0490.
Written by the team at Gate Repair Round Rock.
What Our Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Jasmine Carter"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Scott Sullivan"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Paige Schaefer