Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Manor, TX
We provide independent Ghost Controls gate repair across Manor, TX. We’re not affiliated with the manufacturer and we’re not an authorized dealer, but Ghost Controls systems are a big part of what we work on. The thing that makes our Ghost Controls work different here is the ground itself: in Manor, a gate that stops halfway is often a post problem before it’s ever a motor problem. Our technicians have up to 11 years of experience with residential gate operators, and we bring that to every Ghost Controls call. Call (888) 853-0490. We answer 24/7.
Why Manor Residents Choose Us for Ghost Controls Service
We’re a dedicated gate shop. Gates are the trade, not a side service bolted onto something else. That focus is why we can walk up to a Ghost Controls operator, listen to how it cycles, and usually tell you what’s binding before we’ve opened the housing.
Ghost Controls is a DIY-friendly residential line, and that shapes how we service it. Many of the systems we see in Manor were installed by the homeowner, which means we’re often looking at a good operator mounted on a post that was never set up to handle Blackland Prairie clay. We know the failure points on these units: control boards that take on water, solar charge controllers that quit in August heat, limit switches thrown out of alignment by a moving post. We repair and install with quality parts that fit the equipment, and we’ll tell you plainly when an aftermarket battery or panel makes more sense than an OEM replacement.
Scheduling is straightforward. You tell us what the gate is doing, we book a visit, and you get a written price before anything is touched. If you want to talk through a Ghost Controls repair in Manor, call (888) 853-0490. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Manor
- Control board corrosion. Manor’s humid summers and heavy spring rains push moisture into operator housings, especially when the unit sits low on a post. Once water reaches the board, you get erratic cycles, phantom reversing, or a gate that won’t respond at all. We dry, test and replace board components, and we’ll suggest raising the mount if the housing sits where water pools.
- Battery and solar charge controller failures. Long, hot Manor summers are hard on batteries and charge controllers. On solar Ghost Controls units, a failing battery shows up as intermittent operation that gets worse through July and August, then quits entirely. We test voltage under load and check panel angle before recommending a replacement.
- Limit switch and arm stroke misalignment. When a post shifts in the clay, the operator arm goes out of geometry and the limit switches stop matching the gate’s actual travel. The result is a gate that opens partway, slams, or reverses mid-cycle. Realignment starts with the post, not the switch.
- Remote and keypad connectivity loss. UV exposure degrades receiver antennas and moisture gets into exposed wiring splices. Remotes start working only up close, then stop working at all. We trace the receiver and the wiring run rather than swapping remotes until one works.
- Motor strain from a binding gate. A gate that drags on the ground or binds at the hinge makes the motor work harder every cycle. Left alone, that strain finds the weakest part of the drive. We free the gate’s travel first so the motor isn’t fighting the hardware.
Ghost Controls Service in Manor: What Local Conditions Mean for Your Equipment
Manor sits on the Blackland Prairie east of Austin, and the clay under it behaves differently from the limestone ground to the west. That clay takes on water and swells, then dries and shrinks, and it moves gate posts with it. We see this across Manor, from the older farm properties out toward the fast-growing subdivisions on the east side, and it’s most obvious after a wet spring. A Ghost Controls operator that ran perfectly through a dry August can bind and stall within days of heavy rain, because the posts themselves have moved and thrown the arm out of alignment. That’s why our diagnostic order here starts with the gate and its posts, then moves to the motor, limit switches and control board. Technicians in Manor routinely re-set and re-level posts before touching the electronics, and it’s common to come back to the same property each spring to re-set what winter and rain shifted. If your Ghost Controls gate is misbehaving after weather, that sequence is worth knowing before you replace anything.
Ghost Controls Models & Products We Service in Manor
We work on the Ghost Controls residential line as it’s actually built: single swing openers like the DS1L, dual swing systems like the TDS2L, tube gate openers like the TDS2, and solar-powered units like the DS1S. That covers everything from a basic driveway swing gate to a solar setup on a larger Manor lot where running power to the gate isn’t practical.
Parts matter more than people expect on these units. We use OEM Ghost Controls boards, harnesses and arm assemblies when they’re available, because compatibility keeps the operator behaving the way it was designed to. Where an aftermarket battery or solar panel gives you better value or longer life, we’ll say so. We’re independent, so the recommendation follows your gate, not a dealership agreement. Electric or manual, we handle both, and we service both residential driveways and commercial access gates in Manor.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Manor
Ghost Controls gate repair in Manor is priced per job, and you get the number in writing before we start. Nothing gets done until you’ve agreed to the estimate.
- Diagnostic visit and written estimate: free.
- Post re-set and re-level: quoted after we see how far the post has moved and what the footing needs.
- Limit switch and arm realignment: quoted per gate after we’ve confirmed the post is stable.
- Control board or receiver repair: depends on whether components can be saved or the board needs replacement.
- Battery and solar charge controller replacement: quoted with the part, and we’ll tell you if an aftermarket option is the better buy.
What drives the cost is mostly access and how much of the problem is in the ground versus the electronics. A gate that only needs realignment is a different job from one that needs a post pulled and re-set in concrete. Our technicians have up to 11 years of experience and will give you a straight repair-versus-replace call if the operator has multiple failures at once. Call (888) 853-0490 for a free estimate on your Ghost Controls system in Manor.
Serving Manor, TX – Our Local Coverage Area
We serve Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Manor
That pattern usually points to a post that has shifted in Manor’s clay or moisture that has reached the control board or a wiring connection. Rain-soaked ground swells, the post moves, the arm goes out of alignment, and the operator reads the resistance and reverses as a safety response. We check the posts and the gate’s travel first, then the board and connections. Call (888) 853-0490 for a free estimate.
Yes, but the battery and charge controller take the hit, not the panel. Long stretches of heat shorten battery life, and a failing battery shows up as operation that gets weaker through the summer before quitting. We test voltage under load and check panel angle, and we’ll recommend a quality replacement battery when that’s the fix. Call (888) 853-0490 to book a check.
Half-travel almost always means the limit switch no longer matches the gate’s actual position, usually because the post or arm has moved. The operator thinks it has reached the end of its run when it hasn’t. We re-level the post if needed, realign the arm, and reset the limits so the cycle matches the gate. Call (888) 853-0490 for an estimate.
It’s usually the receiver or its antenna, not the remote. UV exposure degrades antennas and moisture gets into exposed wiring, so the signal weakens and the remote only works up close. We test the receiver and trace the wiring before recommending any part. Call (888) 853-0490 and we’ll sort it out.
It depends on how many systems have failed at once. Ghost Controls operators are repairable, and a single board, battery or limit switch issue is usually worth fixing. If the board, motor and arm are all failing together on an operator over a decade old that’s never had a board replacement, a new unit is often the better long-term spend. We give you both numbers and let you decide. Call (888) 853-0490 for a free estimate in Manor.
Service Areas Near Manor
We handle Ghost Controls repair and installation across Manor and the surrounding communities, including Pflugerville, Elgin, Hutto and Round Rock. If your gate is in one of those areas and it’s a Ghost Controls system, we can help.
Book Your Ghost Controls Service in Manor Today
If your Ghost Controls gate is dragging, reversing, or dead after a wet spell, get it looked at before the motor takes the strain. Same-day service is often available, and estimates are free. Call (888) 853-0490. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Round Rock.