Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Round Rock?
Gate installation in Round Rock typically costs $2,800-$6,500 for a residential driveway gate, with the operator and access control adding $900-$2,400 on top of the gate itself. A basic manual single swing gate starts around $1,800, while a commercial slide gate with a high-cycle operator and access control runs $9,000-$18,000. These are estimated 2026 ranges for the Round Rock market, and the written estimate after we look at your property sets the final price.
We’re gate repair Round Rock specialists, which means gates are the whole job, not a side line. Our technicians have up to 11 years of experience across residential and commercial systems, and we install new gates as readily as we repair old ones. If a gate is beyond saving, you don’t get handed to a different contractor.
Key Takeaways
- Residential driveway gate installation usually lands between $2,800 and $6,500, gate and hardware included.
- The operator and access control are often the biggest single line on the estimate, $900-$2,400 for most homes.
- Slope, soil, and whether power reaches the gate post push the number up more than the gate style does.
- Commercial slide gates and access systems run $9,000-$18,000 depending on cycle rating and controls.
- Estimates are free and the price is set per job by the written estimate, not by a phone guess.
Gate Installation Cost Breakdown (2026)
Gate pricing in Round Rock splits into the gate structure, the operator, the access control, and the site work. Here’s how each line typically breaks down for a residential install:
| Line item | Typical range (installed) | What it covers |
|---|---|---|
| Manual swing gate (single) | $1,800-$3,200 | Gate panel, posts, hinges, basic hardware |
| Manual swing gate (double) | $2,900-$5,200 | Two panels, center posts, latch hardware |
| Slide gate (residential) | $3,400-$6,500 | Track, rollers, gate frame, posts |
| Swing operator (residential) | $900-$1,600 | Motor, arms, mounting, basic controls |
| Slide operator (residential) | $1,200-$2,000 | Motor, chain or rack drive, controls |
| Solar operator package | $1,400-$2,600 | Solar operator, panel, battery, controller |
| Access control (keypad, remotes) | $350-$900 | Keypad, receiver, remotes, wiring |
| Safety sensors and edges | $250-$700 | Photo eyes, safety edges, loop detector |
| Concrete pads and footings | $400-$1,200 | Post footings, operator pad, track bed |
| Power run to gate post | $500-$1,800 | Trenching, conduit, wiring to the gate |
| Commercial slide gate and operator | $9,000-$18,000 | Heavy gate, high-cycle operator, access control |
The gate panel is usually the smaller half of the bill once you go automatic. Most homeowners are surprised that the operator, sensors, and access control put together can match or exceed the cost of the gate frame itself, especially on a slide gate. A manual gate keeps the number low; the moment you add a motor, safety devices become part of the job, and those parts have to be installed correctly so the gate reverses or stops the way it should.
Brand choice moves the total too. Entry-level residential operators like Mighty Mule and Ghost Controls sit at the lower end, and solar packages from those two lines are a good fit for a gate post with no easy power. Mid-range staples like LiftMaster, Linear, and Viking land in the middle and bring more control options. Commercial-grade systems from FAAC, BFT, DoorKing, and Elite cost more up front but are built for gates that cycle dozens of times a day. We work on all nine, so the recommendation follows your gate and your traffic, not a dealership incentive.
What Affects Gate Installation Pricing in Round Rock
Two gates of the same style can come in a few thousand dollars apart. What drives the difference is almost always the site and the electrical work, not the gate.
- Power at the gate post. If there’s no power run to where the operator sits, trenching and conduit add real cost. A solar operator can avoid that trench entirely, and we install solar packages from Ghost Controls and Mighty Mule for exactly that reason.
- Soil and slope. Round Rock sits on ground that ranges from tight clay to shallow limestone, and shallow limestone means posts sometimes need to be set differently and concrete pads cost more. A sloping driveway also pushes up gate and operator pricing because the gate has to clear the grade through its whole swing or travel.
- Gate width and weight. Wider gates need heavier posts and, on a slide gate, a longer track and a stronger operator. A double swing gate needs two hinge posts and a center post, and the hardware adds up.
- Operator duty cycle and safety. A home gate that opens a few times a day can run a lighter operator. A property manager’s gate that opens all day needs a high-cycle commercial unit and heavier safety devices. That’s where the jump from residential to commercial pricing comes from.
- Access control. A simple keypad and remotes cost a fraction of a telephone entry system with call-in access and multiple credentials. For a commercial gate, DoorKing entry hardware is a common fit and shifts the total accordingly.
- Permits. Most cities require a permit for a permanent gate and its electrical work, so ask Round Rock’s building department what your project needs before work starts. Permit costs vary by scope, which is another reason a written estimate beats a phone number.
How to Save on Gate Installation
The biggest savings on a gate install come from decisions made before anyone digs. A few things worth weighing:
- Pick manual if the gate doesn’t need to open on its own. A manual gate with good hardware runs well under the cost of the same gate automated, and you can add an operator later when the budget allows.
- Go solar if power is far away. If the nearest power is a long trench from the gate post, a solar operator package from Mighty Mule or Ghost Controls often costs less than the trench, conduit, and wiring combined.
- Match the operator to real use. Putting a commercial-duty operator on a home gate you open twice a day spends money you don’t need to. A properly sized residential unit does the job.
- Repair before you replace. If your current gate is structurally sound and only the operator or control board has failed, a repair is usually the cheaper path. Our electric gate repair work starts with diagnosis, and we’ll tell you honestly whether the gate is worth keeping.
- Get the estimate in writing before work starts. The written estimate protects you from surprises and lets you compare scope line by line.
- Bundle the access control into the install. Adding a keypad, receiver, and remotes during the original install costs less than adding them afterward, because the wiring is already there.
Estimates are free. Call (888) 853-0490 and we’ll look at the gate, the power, and the grade, then put a clear number in front of you.
Can You Install a Gate on a Property With No Power at the Post?
Yes, and it’s one of the most common jobs we take on. A solar operator package lets you automate the gate without trenching power out to the post. Solar systems from Ghost Controls and Mighty Mule handle most residential driveway setups well, and they run off a panel and battery that mount at the gate itself.
For a commercial gate with a lot of traffic, solar is usually the wrong answer because the draw outruns the panel. In that case the job needs a proper power run, and we’ll walk you through where the trench goes and what the conduit run adds. Either way, the estimate tells you which path costs less for your gate. Call (888) 853-0490 to talk it through. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Gate Installation Cost
How much does a driveway gate cost to install in Round Rock?
A residential driveway gate in Round Rock typically runs $2,800-$6,500 fully installed, gate and hardware included, with the operator and access control adding $900-$2,400 on top. A manual single swing gate is the low end; a slide gate with a solar operator sits at the high end. Call (888) 853-0490 for an exact quote – estimates are free.
Is it cheaper to repair or replace a gate in Round Rock?
A repair is almost always cheaper, often several hundred to a couple thousand dollars less than a new install, and it makes sense when the gate frame, posts, and hinges are structurally sound. Replacement wins when the gate is bent, the posts are failing, or the operator has been replaced once and the gate itself is on its last legs. We diagnose first and tell you which side of that line your gate is on. Call (888) 853-0490.
How much does an automatic gate operator cost in Round Rock?
A residential swing operator typically runs $900-$1,600 installed, and a residential slide operator runs $1,200-$2,000. Solar packages land around $1,400-$2,600, and commercial-grade operators from FAAC, BFT, DoorKing, or Elite cost more because they’re built for heavy daily cycling. The written estimate sets your final number. Call (888) 853-0490 for a free estimate.
How long does gate installation take in Round Rock?
A basic manual gate can be installed in a day, a residential automatic gate typically takes one to three days, and a commercial slide gate with a power run and access control can run several days. The timeline depends on the footing work, whether power has to be trenched, and the operator. We’ll give you a realistic timeline with the written estimate. Call (888) 853-0490.
Do I need a permit to install a gate in Round Rock?
Most cities require a permit for a permanent gate and its electrical work, so ask Round Rock’s building department what your project needs. Permit costs vary by scope and aren’t included in the gate ranges on this page. Our on-site estimate covers the gate, operator, and site work, and we’ll flag where a permit applies. Call (888) 853-0490 – estimates are free.
What Happens When You Call
We start by asking what the gate needs to do and how often it opens, because that decides the operator class before anything else. Then we look at the gate location, the grade, the power, and the access control, and put the whole job into one written estimate. If a repair keeps your existing gate running for a fraction of the install price, we’ll say so. We install new gates, fix existing ones, and handle electric and manual systems alike, so there’s no second contractor to source.
If you’re in Round Rock and weighing a new gate, call Round Rock gate specialists at (888) 853-0490 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Whether it’s a residential driveway gate or a commercial access system, we’ll get you a clear number and a plan to back it up.
Pricing reflects the Round Rock market as of 2026. Gate Repair Round Rock offers free estimates – call (888) 853-0490.
Written by the team at Gate Repair Round Rock.
What Our Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Adriana Torres"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Nathan Thompson"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Rosa Reyes