Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Round Rock
If your driveway gate won’t open, drags on the ground, or the operator has gone silent, we repair gates across Round Rock and get them working again. We’re a dedicated gate specialist – not a garage-door company that also touches gates – and we handle electric and manual systems, residential and commercial, throughout the Round Rock area. Our technicians have up to 11 years of experience, and they work on the brands you’ll actually find on gates here: Linear, Viking, Ghost Controls, DoorKing. Call (888) 853-0490. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Round Rock Homeowners Call Gate Repair Round Rock for Gate Repair
Round Rock’s newer master-planned subdivisions are where most of our gate work happens, and that shapes how we approach every call. Builder-grade cedar privacy gates, aluminum pool gates, and ornamental driveway gates all show up in these neighborhoods, and each has its own failure pattern. We know the difference, and we quote the repair that fits what’s actually installed.
That local knowledge matters when you’re choosing who to call. We bring the brand fluency – from Mighty Mule and Ghost Controls to FAAC, BFT, and DoorKing – that lets us diagnose and fix virtually any residential or commercial gate system without sending you to a second contractor. And when a gate is beyond saving, we install new ones too.
Response time to Round Rock is fast, with same-day service available on many repairs. Estimates are free, the price is quoted and agreed before any work starts, and every job carries a satisfaction guarantee. If you’re in Round Rock and your gate needs attention, we’re set up to help.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Iron Gate Repair in Round Rock
Iron Gate Repair in Round Rock covers the ornamental and wrought-iron-look aluminum gates common on limestone-veneer piers throughout the area. These gates take a beating from Central Texas sun and summer storms with straight-line winds and hail, which bend lightweight aluminum and pop hinges loose over time. When a gate is out of square or the hardware has worked loose, the fix starts with the hinge and post, not the finish. A typical iron gate repair here runs $250 – $650, depending on whether posts need resetting or a section needs welding.
Rust and Finish Problems
Intense sun bakes the finish off metal gates and speeds up rust at weld points and the bottoms of pickets. We treat the rust, re-weld where needed, and re-finish so the gate holds up through another Texas summer.
Hinge and Post Repair
Loose hinges on heavy iron gates often trace back to the post footing giving way in the black clay. We inspect the footing, reset the hinge post at proper depth when it’s shifted, and re-hang the gate so it swings and latches cleanly.
Sliding Gate Repair in Round Rock
Sliding Gate Repair in Round Rock focuses on the rolling gates found on commercial properties and larger residential driveways, where track alignment and operator wiring matter more than swing hardware. Sliding gates that jump the track, drag on the ground, or stop mid-travel usually point to a worn roller, a shifted track, or a control board that’s failed. A typical sliding gate repair in Round Rock runs $300 – $800, depending on whether the operator needs service or just the rolling hardware. Electric or manual, we handle both.
Track and Roller Service
When a slide gate binds, the rollers and track are usually the culprit. We inspect for worn rollers, bent track, and debris buildup, then correct the alignment so the gate travels smoothly end to end.
Operator and Control Wiring
Motor, control board, and safety sensor failures are common on sliding gate operators. We diagnose the electrical side and repair the wiring rather than just replacing parts blindly.
Trusted Brands We Service in Round Rock
We work on the full spectrum of gate operators you’ll encounter in Round Rock. That includes DIY-friendly residential systems like Ghost Controls and Mighty Mule, mid-range staples like Linear and Viking, and commercial-grade operators such as DoorKing. We don’t keep parts on hand for every brand, but we know how these systems are built and what typically fails, which means fast turnaround on diagnosis and repair. Brand-agnostic service is the point: we recommend what’s best for your gate, not what’s best for a single-manufacturer dealership.
Common Gate Repair Problems We See in Round Rock Homes
- Sagging, dragging builder-grade cedar gates. Many privacy gates in Forest Creek and Behrens Ranch were set on posts too shallow for the local black clay. After a dry summer and a wet spring, the hinge post shifts and the gate binds and misses the latch.
- Builder-grade operators undersized for the gate. In developments like Paloma Lake, newly automated gates fail early because the operator wasn’t sized for the gate’s weight plus the extra load from clay-shifted posts.
- Automation added to a manual gate without upgrading the footing or adding safety photocells. The result is misalignment and, worse, an entrapment hazard where the gate closes on a person or vehicle.
- Power and conduit runs omitted at construction. When a solar opener or keypad entry is added later, trenching through established landscaping becomes a real cost that should have been avoided during the build.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Round Rock, TX
Gate repair in Round Rock typically runs $150 – $400 for hinge, latch, and realignment work, $250 – $650 for iron and ornamental gate repairs, and $300 – $800 for sliding gate and operator repairs. Post resetting on a sagging privacy gate adds cost because it means pulling the post, digging to proper footing depth, and re-setting it against the clay. Operator replacement on a builder-grade system that was undersized to begin with runs higher. All prices are estimates. We provide a free estimate, quote the price and agree it with you before any work starts, and the written estimate sets the final price. Call (888) 853-0490 for an exact quote.
A Closer Look at Round Rock’s HOA and Soil Challenges
Round Rock’s growth corridor along I-35, SH-45, and US-79 filled in with HOA-governed subdivisions – Forest Creek, Behrens Ranch, Teravista, Paloma Lake, Walsh Ranch – built in phases over the last 25 years. That changes gate repair here. Most of the work isn’t rust repair on old iron; it’s fixing builder-grade cedar privacy gates, aluminum pool gates, and decorative metal driveway gates whose specs and colors the HOA can dictate. Every quote has to survive an architectural review committee and match a community-wide gate standard, which is far less true in older, unincorporated parts of Williamson County or in adjacent Austin neighborhoods. Add the expansive black clay, and you get a lot of gates that sag and drag within a few years. A typical gate repair here involves a builder-grade cedar privacy gate in a subdivision like Forest Creek or Behrens Ranch that has started to sag because the original posts were set too shallow for the clay. The pro pulls and re-sets the hinge post at proper depth, corrects the sag, and realigns the gate – often finding the builder-grade operator, if present, is undersized for the gate’s weight and daily use.
We Also Serve Cities Near Round Rock
We handle gate repair and installation in Round Rock and the surrounding communities. If you’re in Hutto, Pflugerville, Cedar Park, or Taylor, our gate repair team can help with the same diagnosis, repair, and installation work. Same brands, same approach, same free estimate before any work starts.
Serving Round Rock, TX – Our Local Coverage Area
We serve Round Rock and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Round Rock
Yes. A qualified local pro can source cedar in the tone your HOA approves and match the existing hardware style so the replacement gate passes your architectural review committee. We work within HOA standards in Round Rock’s master-planned subdivisions routinely. Call (888) 853-0490 for a free estimate.
A gate that keeps sagging after you tighten the hinges usually has a hinge post that’s shifted in the expansive black clay, not a hardware problem. The fix is re-setting the post at proper footing depth, not tightening again. Call (888) 853-0490 for an exact quote.
Yes, we can automate an existing manual gate, and new wiring is often needed because many Round Rock homes never had a power or conduit run for an operator. We’ll assess the post footing and safety photocells at the same time. Call (888) 853-0490 for a free estimate.
We service Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule across residential and commercial gates in Round Rock. Brand-agnostic service means we recommend what fits your gate, not a single manufacturer. Call (888) 853-0490 for an exact quote.
An automatic gate with proper entrapment protection has working safety photocells or sensing edges that stop or reverse the gate when something is in its path. If your gate lacks these, we can add them. Call (888) 853-0490 for a free estimate.
Contact Us
If your gate is stuck, sagging, or you’re ready to automate a manual gate, call (888) 853-0490 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts, backed by our satisfaction guarantee.
Written by the team at Gate Repair Round Rock.