Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Cedar Park, TX
Cedar Park is one of the busiest places in Central Texas for gate work, and most of it is new gate installation or a tired gate at the end of its life. The master-planned subdivisions along the US-183A and RM-620 corridors filled in from the 1990s through the 2010s, and those fences and driveway gates are now showing their age. Add limestone soil that fights every post you set and HOA committee rules that govern gate height, color and hardware, and installation here rewards a crew that plans ahead. We’re a dedicated gate specialist, not a garage-door company that also touches gates, and we install electric and manual systems for both homeowners and commercial property managers. Call (888) 853-0490 for a free estimate.
Why Cedar Park Homes Are Different
Cedar Park grew up almost entirely inside homeowners associations, and that changes a gate job before anyone touches a post. In 78613 and the newer sections feeding off RM-620, architectural committees approve fence and gate styles, colors, and even driveway-gate setbacks before the work starts. A decorative wrought-iron gate that looks identical to your neighbor’s may still need a submittal. That means a Cedar Park installation is a scheduling job as much as a building job.
The ground plays its part too. Hill Country limestone sits close to the surface across much of the city, so post holes and hinge anchors don’t just drop in the way they do in softer soil. And the weather swings hard: cedar gates along the Ranch at Brushy Creek and Cypress Creek corridor swell shut after spring rains, then dry, shrink and rattle by August. The same gate can need opposite adjustments within a single year. Intense summer sun on an unshaded driveway also bakes automatic operators and control boards, which is why placement and shade matter more here than on a lot with mature tree cover.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Cedar Park Services
Two jobs bring Cedar Park homeowners and property managers to the phone most often: fixing a gate that has failed, and putting in a new one that will hold up.
Gate Repair in Cedar Park
Gate repair is the everyday work here, and it usually comes down to a hinge that has pulled out of limestone, a swollen cedar panel that scrapes the ground, or a latch that won’t catch. In Cedar Park you can’t treat a gate like a fixed object, because the wood moves with the seasons and the hardware has to move with it. We adjust, re-hang and re-anchor so the gate swings clean through both the wet spring and the dry heat of August. For a full look at how we handle failing hardware and sagging panels, see our gate repair page.
Electric Gate Repair in Cedar Park
Electric gates fail differently, and they need a technician who understands motors, control boards and access wiring, not just hinges. A driveway operator baking in unshaded summer sun is a common cause of a board that acts up or a motor that stalls mid-travel. Safety sensors knocked out of alignment, worn limit switches and wiring damaged by digging are also routine. We test the whole loop, not just the obvious part. Our electric gate repair page covers the electrical side in detail.
Gate Installation in Cedar Park
New gate installation in Cedar Park is shaped by two things: the housing stock and the site. The brick-and-stone tract homes built from the 1990s into the 2010s mostly came with cedar privacy fence gates, and many owners are now replacing those with decorative wrought-iron or automatic driveway gates. Newer custom homes on larger lots often want the full electric setup. Then there’s the ground. Hill Country limestone makes post-setting a real job, and Central Texas heat means an operator and its control board need thoughtful placement if they’re going to last on an unshaded driveway. Our Gate Installation team measures, plans for HOA sign-off and builds it once, correctly.
Automatic Gate Installation
Signs you need it
You’re tired of climbing out to open a manual driveway gate and want an operator, safety sensors and openers that match how you actually drive in and out.
What it costs in Cedar Park
A full automatic driveway gate installation typically runs about $4,500 to $12,000 here, depending on gate material, width and operator grade, with the written estimate setting the final price.
How we do it
We measure the opening, confirm HOA-approved design and setback, set posts to proper footing depth in the limestone, hang the gate, mount and wire the operator, then test sensors and limits before we leave.
Driveway Gate Installation
Signs you need it
The old cedar gate is sagging past adjustment, the driveway is wider than a standard opening, or you want a wrought-iron entrance that reads as a real upgrade to the front of the house.
What it costs in Cedar Park
Driveway gate installation generally falls in the $2,800 to $8,500 range, moving higher for wide openings and decorative iron, and always confirmed in writing before work starts.
How we do it
We plan the posts and spacing around your driveway width and grade, anchor into sound footing, true the panels, and finish the hinges and latch so the gate swings clean and stays square.
What Gate Installation Costs in Cedar Park
Every job is priced per job after we see the site. These ranges show where typical Cedar Park installation work lands.
| Item | Typical range in Cedar Park |
|---|---|
| Driveway gate installation | $2,800 – $8,500 |
| Automatic driveway gate installation | $4,500 – $12,000 |
| Sliding gate installation | $3,400 – $9,500 |
Do I need HOA approval before installing a gate in Cedar Park?
Yes, most Cedar Park subdivisions with architectural committees require approval for gate style, color, height and setbacks before work starts. Get the sign-off first; it saves a rebuild later.
Can you install an electric gate at my Cedar Park home?
Yes. We install electric driveway and sliding gates for Cedar Park homeowners and commercial properties, including the power run, operator, control board and safety sensors.
Brands We Service in Cedar Park
We work across the full brand range, from DIY-friendly residential systems like Ghost Controls and Mighty Mule to mid-range staples like Linear and Viking, up to commercial-grade operators. We don’t stock parts, so we identify what your gate needs, source it, and schedule the visit. Turnaround depends on the part, but we’ll tell you upfront. See our brands for the list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Cedar Park, TX
These are the typical ranges we see across Cedar Park installation work. The written estimate is what you pay – no surprise invoice after the job.
| Service | Typical range in Cedar Park |
|---|---|
| Driveway gate installation | $2,800 – $8,500 |
| Automatic gate installation | $4,500 – $12,000 |
| Sliding gate installation | $3,400 – $9,500 |
| Gate repair | $150 – $650 |
| Electric gate repair | $250 – $1,200 |
| Hinge and latch replacement | $120 – $400 |
| Gate operator replacement | $750 – $2,500 |
In Cedar Park, price climbs with wide openings, decorative wrought-iron panels, limestone that needs extra footing work, and operator grade. Whatever the job, we quote and agree the price before any work starts, and that number is what you see on the invoice.
Neighborhoods We Serve in Cedar Park
We work across Cedar Park’s master-planned subdivisions and the newer custom-home areas on larger lots. Dispatch runs Sunday through Friday, 7am to 7pm, so most Cedar Park calls get a fast response. Tell us your ZIP – 78613 or 78630 – and we’ll line up the visit.
- Ranch at Brushy Creek
- Cypress Creek corridor
- Buttercup Creek
- Twin Creeks
- Forest Oaks
Service Area – Cities Near Cedar Park
Cedar Park is our target city, and we regularly work the surrounding communities. If you’re just over the line, we can help too. See our pages for Leander, TX, Round Rock, TX, Pflugerville, TX and Liberty Hill, TX. Our home base is Gate Repair Round Rock. Wherever you are in the area, call (888) 853-0490 and we’ll get you scheduled.
Serving Cedar Park, TX – Our Local Coverage Area
We serve Cedar Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cedar Park
We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. Most Cedar Park repairs are scheduled same-day or the next opening, and closed Saturday. Call (888) 853-0490 for a free estimate.
That depends on the scope and your subdivision. Most Cedar Park HOAs require architectural approval for gate style, height and color, and the city may require a permit for certain structures. Check with your HOA and the city building department first.
Yes, we cover Cedar Park from 78613 to 78630 and the surrounding communities. If you’re near the edge of the city or just over the line, call and we’ll confirm coverage and get you on the schedule.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Cedar Park Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Nathan Thompson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Ryan Vaughn"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Scott Sullivan